Overview

SECED 2015 was a two-day conference on Earthquake and Civil Engineering Dynamics that took place on 9-10th July 2015 at Homerton College, Cambridge.

This was the first major conference to be held in the UK on this topic since SECED hosted the 2002 European Conference on Earthquake Engineering in London.

The conference brought together experts from a broad range of disciplines, including structural engineering, nuclear engineering, seismology, geology, geotechnical engineering, urban development, social sciences, business and insurance; all focused on risk, mitigation and recovery.

Conference themes

  • Geotechnical earthquake engineering
  • Seismic design for nuclear facilities
  • Seismic hazard and engineering seismology
  • Masonry structures
  • Risk and catastrophe modelling
  • Vibrations, blast and civil engineering dynamics
  • Dams and hydropower
  • Seismic assessment and retrofit of engineered and non-engineered structures
  • Social impacts and community recovery

Keynote speakers

SECED 2015 featured the following keynote speakers (affiliations correct at the time of the conference):

  • Peter Ford and Tim Allmark, Office for Nuclear Regulation, UK
  • Don Anderson, CH2M HILL, Seattle, USA
  • Bernard Dost, Royal Netherlands Meteorological Institute, The Netherlands
  • Anne Kiremidjian, Stanford University, USA
  • Rob May, Golder Associates, Australia
  • Tiziana Rossetto, University College London, UK
  • Andrew Whittaker, University at Buffalo, USA
  • Mike Willford, Arup, The Netherlands

Information for authors

SECED allows the self-archiving of the Author Accepted Manuscripts (AAM) from the SECED 2015 Conference. This means that all authors can make their conference paper available via a green open access route. The full text of your paper may become visible within your personal website, your institutional repository, a subject repository or a scholarly collaboration network signed up to the voluntary STM sharing principles. It may also be shared with interested individuals, for teaching and training purposes at your own institution and for grant applications (please refer to the terms of your own institution to ensure full compliance).

To deposit your AAM, please adhere to the following conditions:

  • You should include a link back to the SECED website.
  • You should include all of the relevant metadata (article title, conference name, conference location, conference dates etc.).
  • You should include a clear licensing statement (see below).

SECED allows authors to deposit their AAM under the Creative Commons Attribution Non-commercial International Licence 4.0 (CC BY-NC 4.0). The deposit must clearly state that the AAM is deposited under this licence and that any reuse is allowed in accordance with the terms outlined by the licence. To reuse the AAM for commercial purposes, permission must be sought by contacting seced@ice.org.uk. For the sake of clarity, commercial usage would be considered as, but not limited to:

  • Copying or downloading AAMs for further distribution for a fee.
  • Any use of the AAM in conjunction with advertising.
  • Any use of the AAM by for promotional purposes by for-profit organisations.
  • Any use that would confer monetary reward, commercial gain or commercial exploitation.

Should you have any questions about our licensing policies, please contact seced@ice.org.uk.

 

Earthquake Risk and Engineering towards a Resilient World

9 - 10 July 2015, Homerton College, Cambridge, UK

Hits: 5063

Review

The accurate modelling of seismic load is a major topic that has raised particular interest in the literature in the recent years. One of the reasons is the advent of performance based earthquake engineering (PBEE) that has become the state of the art for both civil and nuclear structures. The PBEE generally requires transient analysis in order to evaluate the seismic fragility of structures and components. In consequence, a set of hazard consistent ground motion time histories is needed for the transient dynamic analysis to be performed.

In this paper, a simple procedure for simulating artificial earthquake accelerograms matching the statistical distribution of response spectra, as given by the ground motion prediction equations (median and the standard deviation) and correlation coefficients, is presented. The approach, Zentner (2014), follows the general ideas of the natural ground motion selection algorithms proposed by Baker (2011) and Wang (2011) but using simulated (artificial) “spectrum-compatible” accelerograms. This contribution proposes to perform a number of comparative studies in order to assess the capabilities of the simulated accelerograms. Ground motion intensity measures will be compared to the target from GMPE and to the ones of selected natural accelerograms. Finally, the impact on structural response will be evaluated. In particular, we compare a set of natural accelerograms, selected according to the Baker et al. procedure, to a set of simulated time histories.

Tags: SECED 2015  
Date insert: